Investment Casting for Custom Metal Components

Investment casting uses an expendable pattern and a ceramic shell to form a metal component, bringing curved contours and several features into a single casting. That freedom is the process's main advantage — and the reason the drawing deserves extra care: everything that does not need to be machined is cost avoided, and everything that does need machining should be stated plainly. Our engineering, QC and production team reviews where the cast shape is suitable and which mating features require a finishing operation.

 

If the drawings are confidential, complete an NDA first on our NDA page, then send the files with your RFQ.

Molten steel enters a ceramic shell during investment casting.

Pouring steel into a ceramic shell

Molten steel enters a ceramic shell during investment casting.

Photo: 5oclockhustle · CC BY-SA 4.0.

Define the boundary between casting and machining

A contoured body may be usable as cast, while a locating bore or mounting face needs machining. Mark these surfaces on the drawing so the quote describes the same part through casting and any later machining. Specify the required finish, the datums used for inspection, and any surfaces where removal of a gate would affect appearance or function. Include both the as-cast and finished drawings when they are available.

What should the quote cover?

 

  • Alloy and final condition. Supply the material specification and any required heat treatment. Identify permitted substitutions only when the design allows them.
  • Acceptance. Describe cosmetic surfaces, critical dimensions, and inspection requirements. If the assembly depends on fit at a few features, identify those features individually rather than tightening every dimension.
  • Program size. Separate sample quantities, initial production releases and annual demand. Include any existing pattern tooling or prior revision information.

Request an investment casting quote

Share the drawing, model, quantity, and requested delivery date. State whether purchasing needs pricing for the casting alone or for the machined and finished component.

Secondary machining, when it is required, is reviewed with the casting. See also CNC machining and the manufacturing capability overview.

Frequently asked questions

What is the difference between as-cast and finished requirements?

A contoured body may be usable as cast, while a locating bore or mounting face often needs machining. Mark that boundary on the drawing, and send both the as-cast and finished drawings when they are available, so the quote covers the delivered part.

Should the quote be for the casting only, or for the machined and finished component?

Please say which one purchasing needs. If machining, heat treatment, or finish is part of the delivered condition, include those requirements so our engineering, QC and production team can quote them together.

What should I send for an investment casting RFQ?

The current drawing and model, alloy and final condition, sample and production quantities, inspection or cosmetic requirements, and any existing pattern tooling or prior revision information. Start on the RFQ page.

Will you sign an NDA before we send drawings?

Yes. Start on our NDA page, then submit the files on the RFQ page.

Can existing pattern tooling be used?

Yes, when it is available for evaluation and matches the current revision — or can be brought up to it. Describe the tooling and the revision it was built to in the RFQ.

Have a part to quote?

Send the drawing and model, the alloy, quantities, and a clear boundary between as-cast and machined surfaces.

Request a quote