Custom Aluminum and Brass Forging
We manufacture aluminum and brass forgings for custom components. The first question in a forging RFQ is not price — it is what you expect to receive: a forging ready for machining, a machined blank, or a finished component. That single distinction changes the drawing, the inspection requirements, and the price being compared. Defining it up front keeps quotes comparable and avoids surprise cost at first article.
Our engineering, QC and production team reviews the delivery condition, material specification, and any secondary machining before we quote. If the drawings are confidential, complete an NDA first on our NDA page, then send the files with your RFQ.
A hydraulic forging press and manipulator
A hydraulic forging press beside a heavy workpiece manipulator.
Photo: Supersonic0714 · CC BY-SA 3.0.
Define the condition at delivery
For a blank that will be machined later, identify the surfaces that need extra stock and the reference points that will be used for the first machining setup. If a finished component is required, include the dimensions and finish that apply after machining — and provide both the forging drawing and the finished-part drawing when they are available. Grain-flow direction matters on load-bearing features, so note any orientation requirements tied to how the part carries load.
- Material condition. Give the alloy, grade, and required final condition or heat treatment exactly as specified on the drawing.
Have a part to quote?
Tell us the delivery condition, material specification, quantities, and any secondary machining or testing the part requires.
