CNC Machining for Custom Metal Parts
A housing can match its CAD model and still fail to seal if a mating face is too rough. A shaft can measure the right diameter and still bind if its features are misaligned. In CNC machining, the parts that work in the assembly are the ones whose critical features were identified before the first cut — so that is where our engineering, QC and production team begins the review of your request.
If the drawings are confidential, complete an NDA first on our NDA page, then send the files with your RFQ.
What does the drawing need to define?
Send the current model and its dimensioned drawing with matching revision numbers. The model describes the geometry; the drawing defines how the part is made and accepted — material condition, datums, threads, tolerances, and finish. For a bore that fits a bearing, for example, call out the required fit and its relationship to the mounting face. If a tolerance applies after plating or coating, mark that explicitly so the final measurement is taken in the delivered condition.
Photo: Impressionmanufacturer · CC BY-SA 4.0.
- Tool access. Deep pockets, narrow slots, and tight internal corners can limit cutter choice. Identify areas where a larger internal radius is acceptable — small changes there often shorten cycle time without affecting function.
Have a part to quote?
Send the current drawing and model, quantities, and any inspection requirements. Our engineering, QC and production team will review the part as it will be made and inspected.
