---
title: What Should a First Article Inspection Include for Forged Aluminum Parts?
description: "What a first article inspection for forged aluminum parts should include: dimensions, material, heat treat, grain flow, surface and machined features."
image: https://www.manufacturingstandard.com/hubfs/article-2-3.png
---

[Skip to content](https://www.manufacturingstandard.com/blog/first-article-inspection-forged-aluminum-parts#main-content)

[![MS Logo White and Black No Background](https://www.manufacturingstandard.com/hs-fs/hubfs/MS%20Logo%20White%20and%20Black%20No%20Background.png?width=1024&height=1024&name=MS%20Logo%20White%20and%20Black%20No%20Background.png "MS Logo White and Black No Background")](http://ManufacturingStandard.com)

- [Case Studies](https://www.manufacturingstandard.com/case-studies)
- [Capability](https://www.manufacturingstandard.com/capability)
- [About us](https://www.manufacturingstandard.com/about-us)
- [Equipments](https://demo.manufacturingstandard.com)
- [Antenna](https://rf.manufacturingstandard.com)
- [NDA](https://www.manufacturingstandard.com/nda)
- [FAQ](https://www.manufacturingstandard.com/faq)
- Download

- [RFQ](https://www.manufacturingstandard.com/rfq)
- [Contact us](https://www.manufacturingstandard.com/contact-us)

# What Should a First Article Inspection Include for Forged Aluminum Parts?

- November 12, 2026

[Manufacturing Standard](https://www.manufacturingstandard.com/blog/author/manufacturing-standard)

A first article inspection (FAI) for forged aluminum parts should confirm that the first parts made from production tooling and the production process meet every requirement on the drawing: full dimensional results, material and temper, heat treatment results, surface condition, and any machined features, with the results tied to the drawing revision. For forgings, it also helps to agree in advance on forging-specific checks such as parting line, flash, draft, and grain flow when the part is load bearing.

This guide explains what buyers and engineers typically ask for in a forged aluminum first article, and how to define it in the RFQ so there are no surprises when the first parts arrive.

## Why First Article Matters for Forgings

A forging die shapes the part once the tooling is made. If the die, the trim tool, or the heat treat cycle has an issue, every part after the first will carry it. A first article catches these problems before production quantities are made, when corrections are cheaper. It also gives both sides a documented baseline to compare against when a die is repaired, reworked, or replaced later.

## What a Forged Aluminum First Article Usually Covers

### 1. Full dimensional layout

Every dimension and tolerance on the drawing is measured and recorded, usually against a ballooned copy of the drawing so each result maps to a feature. For forgings this typically includes:

- As-forged dimensions, including draft angles and radii.
- Parting line location and mismatch between die halves.
- Flash remaining after trimming.
- Machining stock on surfaces that will be machined later.
- Final machined dimensions, if the part is delivered machined.

### 2. Material and temper

Aluminum forgings are commonly made from alloys such as 6061 or 7075, then heat treated to a specified temper. The first article should confirm the alloy and temper called out on the drawing, using the material documentation and test results the purchase order requires.

### 3. Heat treatment and mechanical properties

If the drawing or specification calls for mechanical property testing, such as hardness, conductivity, or tensile results, the first article should show those results for the first production lot. Agree on the test method and where on the part or test bar samples come from.

### 4. Grain flow and internal soundness (when required)

One of the main reasons to forge is continuous grain flow that follows the part shape. For load-bearing or fatigue-critical parts, buyers sometimes request a macro-etch section to show grain flow, or nondestructive testing for internal defects. These checks add cost and destroy or tie up parts, so specify them only where the function needs them.

### 5. Surface condition and visual standards

Define what is acceptable for laps, folds, die marks, scale, and surface finish. Cosmetic surfaces should be marked on the drawing, and any coating or anodizing requirements should be included so the first article reflects the finished condition.

### 6. Machined features and datums

Many forged aluminum parts are CNC machined after forging. The first article should confirm that machined bores, threads, and faces are located correctly relative to the forged datums. Datum mismatch between the forged and machined features is one of the most common first article findings.

### 7. Marking, traceability, and packaging

If the part requires part number marking, lot codes, or specific packaging to protect machined surfaces, include those in the first article check as well.

## How to Define First Article Requirements in the RFQ

The clearest first articles start with a clear RFQ. Include:

- The drawing revision the first article must match.
- How many first article pieces are needed and whether they are as-forged, machined, or finished.
- The report format the customer prefers, such as a customer form or a ballooned drawing with results.
- Which material and test documentation the purchase order requires.
- Any forging-specific checks: grain flow section, nondestructive testing, or flash and mismatch limits.
- Cosmetic surfaces and finish requirements.

When these items are agreed at the quoting stage, our engineering and QC teams can plan the inspection alongside the forging and machining route. Learn more about our [forging capability](https://www.manufacturingstandard.com/forging) and [CNC machining](https://www.manufacturingstandard.com/cnc-machining), or start with our [RFQ page](https://www.manufacturingstandard.com/rfq).

## Common First Article Findings on Forged Aluminum Parts

- **Die mismatch** beyond the drawing limit at the parting line.
- **Insufficient machining stock** on one side because of die shift.
- **Temper mismatch** between the drawing callout and the heat treat result.
- **Datum shift** between forged surfaces and machined features.
- **Undefined cosmetic standards,** leading to disagreement over die marks or flash remnants.

Most of these are prevented by a design review that confirms draft, parting line, machining stock, and datum strategy before the die is cut.

## FAQ

### When is a first article inspection required?

Typically on the first production run from new tooling, and again after a design revision, a die replacement or major rework, or a process change. The purchase order or customer quality requirements usually define the triggers.

### Does every forged part need a grain flow section?

No. Grain flow sections are usually requested for load-bearing or fatigue-critical parts. For many brackets and housings, dimensional, material, and heat treat checks are enough.

### Should the first article be as-forged or fully machined?

It should match what will be delivered in production. If parts ship machined and finished, the first article should be machined and finished too, with as-forged dimensions recorded where they matter.

### How many first article pieces should I ask for?

It depends on the program. Many buyers ask for a small number of pieces, with multi-cavity dies often checked per cavity. State the quantity in the RFQ.

## Have a part to quote?

Send us your drawings and requirements and our team will review your RFQ.

[Request a Quote](https://www.manufacturingstandard.com/rfq)

 Blog Post

## Related Articles

More guides on CNC machining, forging, die casting, stamping, and custom metal parts.

[![RFQ checklist for custom metal parts](https://www.manufacturingstandard.com/hubfs/article-2.png)](https://www.manufacturingstandard.com/blog/what-to-include-in-rfq-custom-metal-parts)

### [What Should Be Included in an RFQ for Custom Metal Parts?](https://www.manufacturingstandard.com/blog/what-to-include-in-rfq-custom-metal-parts)

 November 5, 2026

 An RFQ for custom metal parts should include clear drawings or 3D models, material and finish specifications,...

[Read more](https://www.manufacturingstandard.com/blog/what-to-include-in-rfq-custom-metal-parts)

[![CNC machining vs 3D printing comparison for precision parts manufacturing](https://www.manufacturingstandard.com/hubfs/AI-Generated%20Media/Images/The%20image%20shows%20a%20sidebyside%20comparison%20of%20CNC%20machining%20and%203D%20printing%20technologies%20in%20a%20sleek%20modern%20design%20On%20the%20left%20a%20CNC%20machine%20is%20depicted%20w.png)](https://www.manufacturingstandard.com/blog/cnc-vs-3d-printing-precision-parts-2026)

### [CNC vs. 3D Printing: When to Use Each for Precision Parts in 2026](https://www.manufacturingstandard.com/blog/cnc-vs-3d-printing-precision-parts-2026)

 February 13, 2026

 CNC vs 3D Printing: When to Use Each for Precision Parts in 2026 When manufacturing precision parts, engineers and...

[Read more](https://www.manufacturingstandard.com/blog/cnc-vs-3d-printing-precision-parts-2026)

[![Complete guide to surface finishing methods for metal parts including anodizing, powder coating, electroplating, and passivation](https://www.manufacturingstandard.com/hubfs/AI-Generated%20Media/Images/The%20image%20showcases%20a%20modern%20manufacturing%20facility%20with%20various%20metal%20parts%20in%20different%20stages%20of%20surface%20finishing%20In%20the%20foreground%20a%20worker%20in%20sa.png)](https://www.manufacturingstandard.com/blog/complete-guide-surface-finishing-metal-parts-2026)

### [The Complete Guide to Surface Finishing for Metal Parts in 2026](https://www.manufacturingstandard.com/blog/complete-guide-surface-finishing-metal-parts-2026)

 February 20, 2026

 The Complete Guide to Surface Finishing for Metal Parts in 2026 Surface finishing for metal parts is one of the most...

[Read more](https://www.manufacturingstandard.com/blog/complete-guide-surface-finishing-metal-parts-2026)

[Check all articles](https://www.manufacturingstandard.com/blog)

 Blog Post CTA

### Have a part to quote?

Send us your drawings and requirements and our team will review your RFQ.

[Request a Quote](https://www.manufacturingstandard.com/rfq)

 Subscribe for

### Our Blog

Get practical articles on processes, RFQs, and taking metal parts from prototype to production.

[![MS\_Logo\_Optimized](https://www.manufacturingstandard.com/hs-fs/hubfs/MS_Logo_Optimized.png?width=600&height=600&name=MS_Logo_Optimized.png "MS_Logo_Optimized")](http://ManufacturingStandard.com)

Manufacturing Standard, LLC manufactures high-precision OEM/ODM metal components, including aluminum and brass forging, die casting, CNC machining, stamping, and investment casting. As a U.S.-based manufacturer with engineering and customer support in the United States and production operations in the U.S. and Asia, we provide tailored solutions with competitive pricing and reliable delivery.

### Pages

- [Home](https://www.manufacturingstandard.com)
- [About](https://www.manufacturingstandard.com/about-us)
- [Capability](https://www.manufacturingstandard.com/capability)
- [Case Studies](https://www.manufacturingstandard.com/case-studies)
- [FAQ](https://www.manufacturingstandard.com/faq)
- [Privacy Policy](https://www.manufacturingstandard.com/privacy-policy)
- [Contact](https://www.manufacturingstandard.com/contact-us)

#### Blog

- [Blog](https://www.manufacturingstandard.com/blog)

#### Contact

- Email subscription preferences
- Unsubscribe backup pages
- Subscription update confirmation
- Search Results

---

- Terms and Services
- Privacy Policy

 © 2026 Manufacturing Standard, LLC. All rights reserved. [Follow us on LinkedIn](https://www.linkedin.com/company/manufacturingstandard/)

```json
{
  "@context" : "https://schema.org",
  "@type" : "BlogPosting",
  "author" : {
    "@type" : "Person",
    "name" : "Manufacturing Standard",
    "url" : "https://www.manufacturingstandard.com/blog/author/manufacturing-standard"
  },
  "dateModified" : "2026-11-12T15:16:22.237Z",
  "datePublished" : "2026-11-12T15:15:37.000Z",
  "headline" : "What Should a First Article Inspection Include for Forged Aluminum Parts?",
  "image" : [ "https://www.manufacturingstandard.com/hubfs/article-2-3.png" ],
  "mainEntityOfPage" : {
    "@id" : "https://www.manufacturingstandard.com/blog/first-article-inspection-forged-aluminum-parts",
    "@type" : "WebPage"
  },
  "publisher" : {
    "@type" : "Organization",
    "logo" : {
      "@type" : "ImageObject",
      "url" : "https://www.manufacturingstandard.com/hubfs/MS%20Logo%20White%20and%20Black%20No%20Background-1.png"
    },
    "name" : "Manufacturing Standard, LLC"
  }
}
```

```json
{ }
```

```json
{
  "@context" : "https://schema.org",
  "@id" : "https://www.manufacturingstandard.com/#organization",
  "@type" : "Organization",
  "address" : [ {
    "@type" : "PostalAddress",
    "addressCountry" : "US",
    "addressLocality" : "Albuquerque",
    "addressRegion" : "NM",
    "name" : "USA Headquarters Office",
    "postalCode" : "87109",
    "streetAddress" : "6801 Jefferson St. NE, Ste 150#3061"
  }, {
    "@type" : "PostalAddress",
    "addressCountry" : "US",
    "addressLocality" : "Poway",
    "addressRegion" : "CA",
    "name" : "San Diego Office and Factory",
    "postalCode" : "92064",
    "streetAddress" : "14045 Kirkham Way, Suite 108"
  } ],
  "contactPoint" : {
    "@type" : "ContactPoint",
    "areaServed" : "US",
    "availableLanguage" : [ "English" ],
    "contactType" : "sales",
    "email" : "info@manufacturingstandard.com",
    "telephone" : "+1-858-997-0056"
  },
  "email" : "info@manufacturingstandard.com",
  "identifier" : [ {
    "@type" : "PropertyValue",
    "name" : "UEI",
    "value" : "LES3R93B6XK5"
  }, {
    "@type" : "PropertyValue",
    "name" : "CAGE",
    "value" : "19VX2"
  } ],
  "logo" : "https://www.manufacturingstandard.com/",
  "makesOffer" : {
    "@type" : "Offer",
    "itemOffered" : {
      "@type" : "Service",
      "name" : "Custom metal parts manufacturing",
      "serviceType" : [ "CNC machining", "Aluminum forging", "Brass forging", "Die casting", "Investment casting", "Metal stamping", "Finishing", "In-house tooling" ]
    },
    "url" : "https://www.manufacturingstandard.com/rfq"
  },
  "name" : "Manufacturing Standard, LLC",
  "sameAs" : [ "https://rf.manufacturingstandard.com/" ],
  "telephone" : "+1-858-997-0056",
  "url" : "https://www.manufacturingstandard.com/"
}
```

```json
{
  "@context" : "https://schema.org",
  "@id" : "https://www.manufacturingstandard.com/#localbusiness-poway",
  "@type" : "LocalBusiness",
  "address" : {
    "@type" : "PostalAddress",
    "addressCountry" : "US",
    "addressLocality" : "Poway",
    "addressRegion" : "CA",
    "postalCode" : "92064",
    "streetAddress" : "14045 Kirkham Way, Suite 108"
  },
  "email" : "info@manufacturingstandard.com",
  "geo" : {
    "@type" : "GeoCoordinates",
    "latitude" : 32.93447,
    "longitude" : -117.02647
  },
  "identifier" : [ {
    "@type" : "PropertyValue",
    "name" : "UEI",
    "value" : "LES3R93B6XK5"
  }, {
    "@type" : "PropertyValue",
    "name" : "CAGE",
    "value" : "19VX2"
  } ],
  "image" : "https://www.manufacturingstandard.com/",
  "name" : "Manufacturing Standard, LLC — San Diego Office and Factory",
  "parentOrganization" : {
    "@id" : "https://www.manufacturingstandard.com/#organization"
  },
  "telephone" : "+1-858-997-0056",
  "url" : "https://www.manufacturingstandard.com/"
}
```

```json
{
  "@context" : "https://schema.org",
  "@id" : "https://www.manufacturingstandard.com/#localbusiness-albuquerque",
  "@type" : "LocalBusiness",
  "address" : {
    "@type" : "PostalAddress",
    "addressCountry" : "US",
    "addressLocality" : "Albuquerque",
    "addressRegion" : "NM",
    "postalCode" : "87109",
    "streetAddress" : "6801 Jefferson St. NE, Ste 150#3061"
  },
  "email" : "info@manufacturingstandard.com",
  "name" : "Manufacturing Standard, LLC — USA Headquarters Office",
  "parentOrganization" : {
    "@id" : "https://www.manufacturingstandard.com/#organization"
  },
  "telephone" : "+1-858-997-0056",
  "url" : "https://www.manufacturingstandard.com/"
}
```